1911

1911 Dovetail Front Sight, .330" x .075" x 65 degree dovetail (aka "Novak Lo Mount" spec). Machined from pre hardened 4140 bar stock for superior toughness. Black oxide finish. Accepts .060 fiber optic rod, with .075" recessed inset at blade ends for...

10-8 1911 Grip Panels, Black Cherry, with Hilton Yam signature inlay. Panels are standard Government frame length, GI profile (covers plunger tube), 5 LPI checkered G10 glass/epoxy composite, mag catch scoop, cut for ambidextrous safety, flat bottom...

10-8 1911 Grip Panels, Black, with Hilton Yam signature inlay. Panels are standard Government frame length, GI profile (covers plunger tube), 5 LPI checkered G10 glass/epoxy composite, mag catch scoop, cut for ambidextrous safety, flat bottom...

10-8 1911 Grip Panels, Dirty Olive, with Hilton Yam signature inlay. Panels are standard Government frame length, GI profile (covers plunger tube), Stipple textured G10 glass/epoxy composite, mag catch scoop, cut for ambidextrous safety, flat bottom...

10-8 1911 Grip Panels, Black, with Hilton Yam signature inlay. Panels are standard Government frame length, GI profile (covers plunger tube), Fragmentation Grenade pattern cut G10 glass/epoxy composite, mag catch scoop, cut for ambidextrous safety,...

10-8 1911 Grip Panels, Black, with Hilton Yam signature inlay. Panels are standard Government frame length, GI profile (covers plunger tube), Hydra pattern cut G10 glass/epoxy composite, mag catch scoop, cut for ambidextrous safety, flat bottom...

10-8 1911 Grip Panels, Dirty Olive Burl, with Hilton Yam signature inlay. Panels are standard Government frame length, GI profile (covers plunger tube), Hydra pattern cut G10 glass/epoxy composite, mag catch scoop, cut for ambidextrous safety, flat...

10-8 1911 Grip Panels, Hyena Brown Burl, with Hilton Yam signature inlay. Panels are standard Government frame length, GI profile (covers plunger tube), Hydra pattern cut G10 glass/epoxy composite, mag catch scoop, cut for ambidextrous safety, flat...

10-8 1911 Grip Panels, Predator Green Burl, with Hilton Yam signature inlay. Panels are standard Government frame length, GI profile (covers plunger tube), Hydra pattern cut G10 glass/epoxy composite, mag catch scoop, cut for ambidextrous safety,...

1911 Hard Pin Set, blue/Carbon Steel, 11 pieces. Our pins are turned from hardened stock, and are superior to cheap factory pins made from mild steel. Broken or worn pins can cause your 1911 to fail you when you need it most. This pin set is an...

1911 Hard Pin Set, stainless steel, 11 pieces. Our pins are turned from hardened stock, and are superior to cheap factory pins made from mild steel. Broken or worn pins can cause your 1911 to fail you when you need it most. This pin set is an affordable...

1911 Mainspring Housing, flat, for full size Government Model, Commander and clones. Machined from aluminum bar stock. Does not include main spring or internal parts. A great choice if you're trying to cut some weight from your 1911 build or upgrade your...

Our National Match style rear sight is designed to fit into the dovetail of GI pattern 1911 pistols.  Its extra thick serrated blade is .315" tall (total height, from base to top of blade) for compatibility with new production Colts, and features a ...

1911 Spring Guide. GI format spring guide with beveled head to prevent damage to lower lugs of barrel. Head geometry and dimensions are optimized for correct slide travel, even with common buffers installed. Heavily tumbled to remove sharp edges...

1911 Commander Spring Guide. GI format spring guide with beveled head to prevent damage to lower lugs of barrel. Heavily tumbled to remove sharp edges. Stainless steel, natural finish. Fits all 1911 Commander sized 1911s (4.25" barrel) and clones in all...

Our classic 10-8 Performance rear sight design, featuring a Lo Mount dovetail, CNC machined from hardened 4140 bar stock and finished in black oxide. Rear face is serrated at 40lpi to reduce glare, with a .125" deep U notch. Features ledge profile...

Our 1911/2011 Mainspring Housing (MSH) Pin Tool features a robust and compact all steel design with a punch long enough to reach all the way through a 2011 grip module to drive the MSH pin out, even on guns with mag wells installed. Also works perfectly...

Our 2011 Armorer Tool is the next step in our evolution of bench tools, and is designed to assist in the disassembly of a 9mm 1911/2011 slide.  The 9mm extractor's claw tends to overhang the breech face, making it a challenge to cleanly push it...

The Armorer Block is the culmination of years of tinkering on the 1911 and getting by with a box of tools and fixtures that didn't quite do what I wanted.   This 4"x4"x1.25" block is CNC machined from super tough nylon, and will give years of...

The 10-8 Performance Armorer Tool is a simple nonmarring tool molded from glass reinforced nylon. It is useful for countless applications where use of metal tools can easily damage your work. It is approximately 5" long and 1/4" in diameter, and features...

The 10-8 Performance Armorer Tool is a simple nonmarring tool molded from glass reinforced nylon. It is useful for countless applications where use of metal tools can easily damage your work. It is approximately 5" long and 1/4" in diameter, and features...

The 10-8 Performance Armorer Tool is a simple nonmarring tool molded from glass reinforced nylon. It is useful for countless applications where use of metal tools can easily damage your work. It is approximately 5" long and 1/4" in diameter, and features...

Barrel Bushing for 1911 Government Model, all calibers. Machined from stainless steel with natural finish. Flange is .100" thick and matches perfectly with the 10-8 Spring Plug or most Colt/GI style plugs. Flange has carry bevel machined into outside...

***Update 02/05/2024: We are no longer able to get restock on the physical DVD. However, my Patreon's "Charlie" Tier (CLICK HERE) has a year long 1911 build class which covers all these same topics. The archived recordings are available to...

Our flat head grip screws are made to the original GI print, and have a concave slot profile to allow the use of a cartridge rim as a field expedient screwdriver.  Set of 4. Prehardened carbon steel bar stock with blued finish.  For standard...

Our flat head grip screws are made to the original GI print, and have a concave slot profile to allow the use of a cartridge rim as a field expedient screwdriver.  Set of 4. Prehardened 416 stainless bar stock with natural finish.  For...

Our original 1911 hammers have been redesigned for even better performance! 10-8 bobbed spur hammer, tool steel with black oxide finish. Due to the short spur, this hammer will fit into most common beavertails where your existing hammer fits...

The 10-8 Performance 1911 extended magazine catch features additional length of approximately .045" over a stock catch, and a unique 30lpi serrated curved button surface for positive activation. This magazine catch also features a number of other...

Our classic concave spring plug. Plug end protrusion is .100" with plug length (minus protrusion) of 1.0".  Machined from stainless steel, natural finish. Fits Commander Models with 4.25" bushing barrels only. Please note that 1911's with...

Our classic concave spring plug. Plug end protrusion is .100". Machined from stainless steel, natural finish. Fits all full sized 1911/Government Models with 5" bushing barrels.  

**For Springfield Emissary, and Prodigy models ONLY, which have a 4.25" CONE barrel and reverse plug which loads from the rear of the slide's spring tunnel.   **IF YOUR GUN HAS A BARREL BUSHING, THIS IS NOT FOR YOUR GUN!  You...

**For Springfield TRP Operator, Emissary, and Prodigy models ONLY, which have a 5" Government Model length CONE barrel and reverse plug which loads from the rear of the slide's spring tunnel.   **IF YOUR GUN HAS A BARREL BUSHING, THIS...

*While this part is a drop in fit in many pistols, gunsmith fitting may be required on some guns.  The .200" (nominal) diameter pin is typically bigger than your factory unit (they tend to run .195-.199") and may not fit into the frame hole...

Springfield 1911 Dovetail Front Sight, .078" x 60 degree dovetail. Precision CNC machined from hardened 4140 bar stock for improved durability and finished in black oxide. Blades feature a 40lpi serrated front face for reduction of glare in all lighting...

Features a solid aluminum shoe with a serrated face in bead blasted natural finish, a full width stainless steel bow, and a fixed stainless steel overtravel stop permanently mounted from the rear of the shoe. This trigger eliminates all issues associated...