10-8 1911 Grip Panels, Black, with Hilton Yam signature inlay. Panels are standard Government frame length, GI profile (covers plunger tube), Fragmentation Grenade pattern cut G10 glass/epoxy composite, mag catch scoop, cut for ambidextrous safety,...

10-8 1911 Grip Panels, Predator Green Burl, with Hilton Yam signature inlay. Panels are standard Government frame length, GI profile (covers plunger tube), Hydra pattern cut G10 glass/epoxy composite, mag catch scoop, cut for ambidextrous safety,...

The 10-8 Performance Armorer Tool is a simple nonmarring tool molded from glass reinforced nylon. It is useful for countless applications where use of metal tools can easily damage your work. It is approximately 5" long and 1/4" in diameter, and features...

The 10-8 Performance Armorer Tool is a simple nonmarring tool molded from glass reinforced nylon. It is useful for countless applications where use of metal tools can easily damage your work. It is approximately 5" long and 1/4" in diameter, and features...

The 10-8 Performance Armorer Tool is a simple nonmarring tool molded from glass reinforced nylon. It is useful for countless applications where use of metal tools can easily damage your work. It is approximately 5" long and 1/4" in diameter, and features...

Performance wicking fabric, 100% spun polyester with soft cotton feel. Gildan 42000 short sleeve with classic width collar, taped neck and shoulders. Modern classic fit. **These are not at all oversized, so if you want one for PT then get your...

Performance wicking fabric, 100% spun polyester with soft cotton feel. Gildan 42000 short sleeve with classic width collar, taped neck and shoulders. Modern classic fit. **These are not at all oversized, so if you want one for PT then get your...

10-8 1911 Grip Panels, Black, with Hilton Yam signature inlay. Panels are standard Government frame length, GI profile (covers plunger tube), Hydra pattern cut G10 glass/epoxy composite, mag catch scoop, cut for ambidextrous safety, flat bottom...

10-8 1911 Grip Panels, Hyena Brown Burl, with Hilton Yam signature inlay. Panels are standard Government frame length, GI profile (covers plunger tube), Hydra pattern cut G10 glass/epoxy composite, mag catch scoop, cut for ambidextrous safety, flat...

10-8 1911 Grip Panels, Dirty Olive Burl, with Hilton Yam signature inlay. Panels are standard Government frame length, GI profile (covers plunger tube), Hydra pattern cut G10 glass/epoxy composite, mag catch scoop, cut for ambidextrous safety, flat...

Features a solid aluminum shoe with a serrated face in bead blasted natural finish, a full width stainless steel bow, and a fixed stainless steel overtravel stop permanently mounted from the rear of the shoe. This trigger eliminates all issues associated...

10-8 Grip Panels for Springfield Armory EMP 4", Black/Gray, with Hilton Yam signature inlay. Panels are standard Government frame length, factory slim profile (uses factory slim grip screw bushings and shortened grip screws), 18 LPI checkered G10...

10-8 Grip Panels for Springfield Armory EMP 4", Black/Gray, with Hilton Yam signature inlay. Panels are standard Government frame length, factory slim profile (uses factory slim grip screw bushings and shortened grip screws), 5 LPI checkered G10...

10-8 Grip Panels for Springfield Armory EMP 4", Black, with Hilton Yam signature inlay. Panels are standard Government frame length, factory slim profile (uses factory slim grip screw bushings and shortened grip screws), 5 LPI checkered G10 glass/epoxy...

10-8 1911 Grip Panels, Dirty Olive, with Hilton Yam signature inlay. Panels are standard Government frame length, GI profile (covers plunger tube), Stipple textured G10 glass/epoxy composite, mag catch scoop, cut for ambidextrous safety, flat bottom...

1911 Dovetail Front Sight, .330" x .075" x 65 degree dovetail (aka "Novak Lo Mount" spec). Machined from pre hardened 4140 bar stock for superior toughness. Black oxide finish. Accepts .060 fiber optic rod, with .075" recessed inset at blade ends for...

Our classic concave spring plug. Plug end protrusion is .100" with plug length (minus protrusion) of 1.0".  Machined from stainless steel, natural finish. Fits Commander Models with 4.25" bushing barrels only. Please note that 1911's with...

1911 Mainspring Housing, flat, for full size Government Model, Commander and clones. Machined from aluminum bar stock. Does not include main spring or internal parts. A great choice if you're trying to cut some weight from your 1911 build or upgrade your...

10-8 1911 Grip Panels, Black Cherry, with Hilton Yam signature inlay. Panels are standard Government frame length, GI profile (covers plunger tube), 5 LPI checkered G10 glass/epoxy composite, mag catch scoop, cut for ambidextrous safety, flat bottom...

1911 Commander Spring Guide. GI format spring guide with beveled head to prevent damage to lower lugs of barrel. Heavily tumbled to remove sharp edges. Stainless steel, natural finish. Fits all 1911 Commander sized 1911s (4.25" barrel) and clones in all...

**For Springfield Emissary, and Prodigy models ONLY, which have a 4.25" CONE barrel and reverse plug which loads from the rear of the slide's spring tunnel.   **IF YOUR GUN HAS A BARREL BUSHING, THIS IS NOT FOR YOUR GUN!  You...

Barrel Bushing for 1911 Government Model, all calibers. Machined from stainless steel with natural finish. Flange is .100" thick and matches perfectly with the 10-8 Spring Plug or most Colt/GI style plugs. Flange has carry bevel machined into outside...

**If you do not intend to use these pads on a Staccato brand magazine in a Staccato brand grip module on a Staccato 2011, then this product is not for you.   Magazine base pad for STI/Staccato 2011 factory magazine, all generations. Intended for...

The Armorer Block is the culmination of years of tinkering on the 1911 and getting by with a box of tools and fixtures that didn't quite do what I wanted.   This 4"x4"x1.25" block is CNC machined from super tough nylon, and will give years of...

Magazine base pad for Glock 19X factory 19 round magazine or Glock 17 factory magazine with +2 extension. CNC machined from 6061 aluminum and Olive Drab (OD) Cerakote color matched to factory magazine tube, with dimples for marking your magazine and...

20 oz Sports Shaker Bottle, smoke grey with black/grey lid and internal strainer style insert for mixing your favorite protein powder drink. Made in USA and emblazoned with our logo and motto! 

The 10-8 Performance magazine catch for the STI/Staccato 2011 Gen1 Grip Module features a unique 30lpi serrated curved button surface for positive activation. The curved button surface matches the contour of your thumb pad when the pistol is rolled over...

Magazine base pad for Glock 19X factory 19 round magazine or Glock 17 factory magazine with +2 extension. CNC machined from 6061 aluminum and Flat Dark Earth (FDE) Cerakote color matched to factory magazine tube, with dimples for marking your magazine...

Magazine base pad for Glock 19X factory 19 round magazine or Glock 17 factory magazine with +2 extension. CNC machined from 6061 aluminum and black anodized, with dimples for marking your magazine and serrated front for positive stripping of stuck...

Black hard anodized CNC machined 6061 aluminum adapter allows you to mount your Blackhawk T Series holster to a Safariland QLS fork for integration into your existing duty belt and other accessories. Installation is simple and uses existing screws from...

Our 1911/2011 Mainspring Housing (MSH) Pin Tool features a robust and compact all steel design with a punch long enough to reach all the way through a 2011 grip module to drive the MSH pin out, even on guns with mag wells installed. Also works perfectly...

Our Gen2 sight upgrades our very popular Classic Glock Rear Sight with the new Gen2 features - coarse serrations on the front ledge for improved racking, scooped blade profile for better downrange visual awareness, and updated dovetail dimensions for...

**If you do not intend to use these pads on a Staccato brand magazine in a Staccato brand grip module on a Staccato 2011, then this product is not for you.   Magazine base pad for STI/Staccato 2011 factory magazine, all generations. Intended for...

Our classic 10-8 Performance rear sight design, featuring a Lo Mount dovetail, CNC machined from hardened 4140 bar stock and finished in black oxide. Rear face is serrated at 40lpi to reduce glare, with a .125" deep U notch. Features ledge profile...

The 10-8 Performance magazine catch for the Staccato 2011 Gen2/3 grip modules features a unique 30lpi serrated curved button surface for positive activation. The curved button surface matches the contour of your thumb pad when the pistol is rolled over...

Digital Download Bundle includes one PDF file which includes: 8" Circle Replacement, with scoring rings. Similar in dimensions to NRA B-8 and FBI Bullseye. Outer 8" circle is same as -0 zone of IDPA Target. Head Box Replacement, 5 3/4" x 5 3/8"...

Staccato 2011 front sight, fiber optic. Made from hardened 4140 bar stock for improved durability and finished in black oxide. Dovetail base is slightly oversized and may require fitting in your particular gun. Blade face is serrated 40lpi. All blades...

**If you do not intend to use these pads on a Staccato brand magazine in a Staccato brand grip module on a Staccato 2011, then this product is not for you.   Magazine base pad for STI/Staccato 2011 factory magazine, all generations. Fits...

Our 2011 Armorer Tool is the next step in our evolution of bench tools, and is designed to assist in the disassembly of a 9mm 1911/2011 slide.  The 9mm extractor's claw tends to overhang the breech face, making it a challenge to cleanly push it...

**If you do not intend to use these pads on a Staccato brand magazine in a Staccato brand grip module on a Staccato 2011, then this product is not for you.   Magazine base pad for STI/Staccato 2011 factory magazine, all generations. Designed to...